HomeElektronikaE-OSD

Komentarze

E-OSD — 7 komentarzy

  1. I couldn’t find any video of E-OSD flashed with CL-OSD and GPS mod on the internet. You shoud post a video of that working so peaple know how it looks like, Is there an arrow poiting home like the G-OSD flashed version?

    • I don’t have any screenshots from E-OSD right now, but i’ll make it at first oportunity and i’ll put it here.

  2. Hi, Brilliant job on this mod! I would like to do the same but i cant seem to find any guides anywhere apart from yours. Do you know if there are any instructions anywhere with exactly what to modify, pins etc which is tx/rx etc.

    Also do you know which types of GPS modules can you use?

    Hope you can help!

    🙂

    • Hello Phil,

      thank you. This is quite simple case – gps sends position using serial protocol, so to receive this, you need to connect it to CPU’s serial port. In Atmega88 there is only one such input (RX) on pin 30 (in this MLF case). If you have simple gps it’s enough, but if you have more advanced module that require reprogramming to change baud rate and other things, connectiong TX (pin 31) pin could be also very handy.
      So, if you zoom last image, you should see that’s what I exactly did.
      More about gps options, mods, flashing alternative firmware you could find at rcgroups thread: http://www.rcgroups.com/forums/showthread.php?t=1490446

      • Excellent! thank you for the info! 🙂 Looks like I will be having a long read on that thread shortly!

  3. Witam!
    Kopałem po RCG a tu rodzimy projekt 🙂 . Mam pytanie czy da się wykorzystac GPS z RemzibiOSD do tego projektu ?Czy ustawienia wprowadza się tylko w config.h , No i czym mozna skompilować projekt po zmianach . A może masz hexa który zadziała z remzibi ?

    pozdrawiam

    Ryszard

    ps. Jak przeczytałem o bloczkach w nadajniku to od razu skojarzyłem czyja to strona 🙂
    w jednym z nadajników z powodzeniem od kilku lat używam modulatora od Zbiga .

    • 1. Projekt nie jest mój. Ja tylko rozrysowałem schemat 🙂
      2. Zmiany robi się w config.h, ale najpierw w hardware.h trzeba odkomentować odpowiedni typ sprzętu (e-osd z lub bez gps-a, lub g-osd)
      3. Nie pamiętam jaki gps ma RemzibiOSD, ale powinno działać. Możliwe, że trzeba będzie przestawić GPS_BAUD na 9600, ale to trzeba popróbować. Byłbym tylko ostrożny z zasilaniem, bo sam moduł gps-a jest na 3.3V i nie wiem czy jest tam dodany stabilizator – jak nie, to trzeba będzie dorobić, bo inaczej można usmażyć moduł.
      4. Co do bloczków, to muszę napisać kolejny post o lcd88, bo w międzyczasie udało mi się to sportować na zwykłe arduino (tzn. hardware) i tani lcd 1.8″ z ebay-a 🙂

Skomentuj majek Anuluj pisanie odpowiedzi

Twój adres e-mail nie zostanie opublikowany. Wymagane pola są oznaczone *

HTML tags allowed in your comment: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>